Articles
EnergyMap - How to Access
Method 1 In Energy Force, go to Route Scheduling / Schedule Deliveries on Map and select the Map icon. Method 2 Select Find located by selecting Tank Info at Customer Menu / Customer Maintenance . Method 3 Navigate to Customer M...
EnergyMap - Basic Navigation
Zoom & Pan # 1 Rule for Using EnergyMap Always have the correct layer selected before attempting to use any feature such as table view, details, scheduling, or creating route boundaries. Zoom In and Out Zoom in/out by using the scroll wheel on...
EnergyMap - Map Settings
Map Settings Select the Settings icon located on the Map toolbar. Choose each tab to customize. Filters Enable filters to specify which tanks display when scheduling tanks for delivery. Show auto-fill tanks which are between – Di...
EnergyMap - Tank Symbols
Auto Fill Tanks Circle The Tank is above delivery thresholds set within map settings. Triangle The Tank is within the delivery target range indicated in map settings. Square The Tank is considered C ritical as it is at or below the c...
EnergyMap - Table View and Box Selection Search
Table View Search Note: The search feature is CASE sensitive. Highlight the appropriate layer to search. Select from the drop-down in the Table View area. This is always defaulted to Any . Change the selection to be more specific if des...
EnergyMap - Plot Tanks on Map
From Energy Force, select the GPS icon located in the Tank screen. EnergyMap will open automatically. This feature can also be accessed from Tanks Not Plotted . Plot mode will be initiated. Zoom in to the area on the map where the tank ...
EnergyMap - Replot a Tank
Tank Plotted Incorrectly Select the appropriate Tank Layer located on the Layers tab ( Propane or Other Non-Propane Tanks). Select the Editing tool located on the EnergyMap Palette. Choose Edit Geometry . Position the Edit symbol d...
EnergyMap - Creating a Route Boundary
Select the appropriate Tank Layer located on the Layers tab ( Propane or Other Non-Propane Tanks). Select the Boundaries tool located on the EnergyMap Palette. Choose Draw Route Boundary . Select on the map where to begin the boundary...
EnergyMap - How to Modify a Route Boundary
Highlight the appropriate layer for editing ( Propane Boundary Lines or Other Boundary Lines ). Zoom in to the route boundary area to be edited. Select the Editing tool located on the Palette. Select Edit Geometry . Choose the route bo...
EnergyMap - Scheduling Tanks
Select the appropriate Tank Layer located on the Layers tab ( Propane or Other Non-Propane Tanks). Select Scheduling on the Palette. Choose Create Schedule . This will activate Scheduling mode. Select anywhere on the map. The Manual...
EnergyMap - Edit Schedules
Routes that have been committed to the layer and the Energy Force database do not allow for modification using EnergyMap. Route Schedule modifications take place within Energy Force. A tank or tanks can be removed from the route or the entire route...
EnergyMap - Troubleshooting Tips
Tanks are Missing Check the filter settings. It may be possible a filter is turned on preventing certain tanks from displaying. Review the tank layers. A tank layer may be unchecked. Scheduled Routes did not Write to Energy Force Always...