- BRUT-523 / Set Start at a Non-Filling Location – Optimizer can now be set to start at a non-filling location such as a driver’s home on run 1.
In order to use this functionality go to the Supervisor Menu / Maintenance Menu / Optimizer Maintenance / Yard and Remote Tanks GPS. Add an entry for the non-filling location (Description - drivers home) with the coordinates (X1 and Y1), Setup Mins and Pumping Glns/Min should be set as 0. In the box on the right enter the Div, and Route this entry is for and set Location Type to Non-Filing and Save.
Next select Supervisor Menu / Maintenance Menu / Optimizer Maintenance / Routes to Schedule. On the route that the Start Location is going to be non-filling (drivers home), go into Modify Mode and use F5 to select the non filling Start Location. If the Start Location for a route is the yard then the Start Location will stay as 0.
- BRUT-602 / Update Email Format of Gallon Projection – Optimizer email format has been updated in the Gallon Projection section to display the projections horizontally instead of vertically. This improves readability and decreases the amount of scrolling needed.
- BRUT-603 / Critical Gallon Projection Chronological Order – Critical Gallon Projection section of the Optigistics email will display routes in numeric order on all databases.
Next select Supervisor Menu / Maintenance Menu / Optimizer Maintenance / Routes to Schedule. On the route that the Start Location is going to be non-filling (drivers home), go into Modify Mode and use F5 to select the non filling Start Location. If the Start Location for a route is the yard then the Start Location will stay as 0.
